The panels

The technologies

The photovoltaic panels are the essential elements of an installation. Therefore they deserve our full attention and to supply the best solutions to our customers, we take care to remain up to date with the latest technologies and products on the market.

During a project, the choice of one of them primarily depends on the orientation, the slope of your roof, but also on your geographical situation and your expectations concerning yield, aesthetics, quality/price ratio.

Currently on the market you will find:

1. Monocrystalline panels:

   Advantages:

   • The yield
   • The service life


2. Polycrystalline panels:

   Advantages:

   • The yield/price ratio
   • Captures diffuse radiation in cloudy weather


3. Les panneaux amorphes:

   Advantages:

   • Aesthetics
   • Captures diffuse radiation in cloudy weather
   • The price

Our references

"

DS Solar DS5M-240

DS Solar DS5M-240

ELECTRICAL FEATURES :

Pmax (Power)* - 240 W
Yield of the cells 16.43%
Power tolerance 0 to +4%
Operating temperature -40°C / +85°C

Cell - Polycrystalline silicon
Dimensions 156 x 156
Anodised aluminium frame

PHYSICAL FEATURES:

Monocrystalline silicon cell
Dimensions (l x h x p) mm 1640 x 990 x 50
Weight 18.6 kg

Quality certificates and guarantees
IEC 61215, CE, IEC 61730
Ten year guarantee on the structure of the module,
Guarantee of production of 90% after 10 years
Guarantee of production of 80% after 25 year

"

DS Solar DS6P-240 Black

DS Solar DS6P-240 Black

ELECTRICAL FEATURES :

Pmax (Power)* - 240 W
Yield of the cells 16.43%
Power tolerance 0 to +4%
Operating temperature -40°C / +85°C

Cell - Polycrystalline silicon
Dimensions 156 x 156
Black aluminium frame

PHYSICAL FEATURES :

Module - DSGPB poly 240
Dimensions (l x h x p) mm 1640 x 990 x 46
Weight 18.6 kg

Quality certificates and guarantees
EC61215, CE, IEC 61730
Ten-year guarantee on the structure of the module
Guarantee of production of 90% after 10 years.
Guarantee of production of 80% after 25 years

"

DS Solar DS5M-240 Black
Coming soon

"

DS Solar DS5M-250

DS Solar DS5M-250

ELECTRICAL FEATURES :

Pmax (Power)* - 250 W
Yield of the cells 17.65%
Power tolerance 0 to +4%
Operating temperature -40°C / +85°C

Cell - Monocrystalline silicon
Dimensions 125 x 125
Anodised aluminium frame

PHYSICAL FEATURES :

Module - DS5M Mono 250
Dimensions (l x h x p) mm 1600 x 1056 x 46
Weight 19,5 kg

Quality certificates and guarantees
IEC61215, CE, IEC 61730
Ten-year guarantee on the structure of the module,
Guarantee of production of 90% after 10 years,
Guarantee of production of 80% after 25 years

"

SW 220/225/230/235 poly

SW 220/225/230/235 poly

SolarWorld panels especially stand out from the others due to their strong resistance to high loads. Therefore this ensures better quality in the event of a heavy deposit of snow or ice.
The panels show a very low reduction in the yield rate under conditions of partial load at 25°C, a yield rate of 95% (+/- 3%) is achieved under standard test conditions (1000 W/m2).

Guarantee

SolarWorld offers you the following exceptional guarantees:

• A guarantee of linearity of power over a period of 25 years that guarantees you power of at least 97% of the nominal power during the first 12 months, then a max. power reduction of 0.7% each subsequent year

• A SolarWorld product guarantee extended to five years

Materials used

Cells per solar panel: 60
Type of cells: polycrystalline silicon
Dimensions of cells: 156 x 156 mm

Physical features

Length: 1675 mm
Width: 1001 mm
Height: 34 mm
Frame: Aluminium
Weight: 22 kg

Behaviour under standard test conditions (STC*)

	SW 220	SW 225	SW 230	SW 235
Power at the point of maximum power Pmax	220 Wc	225 Wc	230 Wc	235 Wc
No-load voltage Voc	36,6 V	36,8 V	36,9 V	37,0 V
Voltage at point of maximum power Vmpp	29,2 V	29,5 V	29,8 V	30,0 V
Short-circuit current Isc	8,08 A	8,17 A	8,25 A	8,35 A
Current at point of maximum power Impp	7,54 A	7,63 A	7,72 A	7,85 A

*STC: 1000W/m2, 25°C, AM 1.5